Appendix B - Specifications - Rosewill RNX-N4 User Manual

Wireless Adapter RNX-N4
8. APPENDIX B – SPECIFICATIONS
Hardware Summary
Physical Interface
LED Status
Power Requirements
Radio Specifications
Frequency Band
Media Access Protocol
Modulation Technology
Operating Channels
Receive Sensitivity
(Typical)
Available transmit
power
Antenna Gain
Router and Gateway
Topology Infrastructure
Operation AP/ Router/ WDS Bridge
Mode
LAN DHCP Server
Static IP
DNS
WAN: One 10/100/1000 Gigabit RJ-45
LAN: Four 10/100/1000 Gigabit RJ-45
Reset Button (1 second for Reboot, 5 second for Reset to Factory
Default )
Power Jack
JTAG (for debug only)
Power/ Status
WAN (Internet connection)
LAN1~LAN4 (10/100/1000Mbps)
WLAN (Wireless Connection)
Power Supply: 90 to 240 VDC ± 10％ (depends on different
countries)
Device: 12 V/ 1.25A
2.400～2.484 GHz
Carrier sense multiple access with collision avoidance
(CSMA/CA)
OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK
11 for North America, 14 for Japan, 13 for Europe
2.412~2.472G(IEEE802.11b) (1Rx)
-93dBm @ 1Mbps
-91dBm @ 11Mbps
2.412~2.472G(IEEE802.11g) (2Rx)
-92dBm @ 6Mbps
-79dBm @ 54Mbps
2.412~2.472G(IEEE802.11N) (2Rx)
-90 dBm MCS 8
-70 dBm MCS 15
2.412~2.472G(IEEE802.11b)
19dBm @1~11Mbps
2.412~2.472G(IEEE802.11g)
19 dBm @6Mbps
16 dBm @54Mbps
2.412~2.472G(IEEE802.11N)
20 dBm MCS 8
16 dBm MCS 15
Peak Gain = 2 dBi
Average Gain = 1.08 dBi (@ 2.45GHz, H-Plan)
92
User Manual