Status; Wireless Status - Rosewill RNX-N4 User Manual

Hide thumbs Also See for RNX-N4:

Table of Contents

Wireless Adapter

RNX-N4

6.5 STATUS

• Click on the Status link on the navigation drop-down menu. You will then see six options:

Wireless, Logs, Statistics, WISH Sessions, Routing, and Internet Sessions. The configuration

steps for each option are described below.

• Click on the Wireless link in the navigation menu. The wireless section allows you to view

the wireless clients that are connected to the device.

• MAC Address: The Ethernet ID (MAC address) of the wireless client.

• IP Address: The LAN-side IP address of the client.

• Mode: The transmission standard being used by the client. Values are 11a, 11b, 11g, or 11n

for 802.11a, 802.11b, 802.11g, or 802.11n respectively.

• Rate: The actual transmission rate of the client in megabits per second.

• Signal: This is a relative measure of signal quality. The value is expressed as a percentage of

theoretical best quality. Signal quality can be reduced by distance, by interference from other

radio-frequency sources (such as cordless telephones or neighboring wireless networks),

and by obstacles between the router and the wireless device.

User Manual

Table of Contents