L2Tp (Layer 2 Tunneling Protocol) - Rosewill RNX-N4 User Manual

Wireless Adapter RNX-N4
• Address Mode: PPTP can be used with a dynamic or static IP address. If you select
the Dynamic IP radio button, then the IIP address in the next field is not required.
However, if you select the Static IP radio button, then the IP address in the next field is
required.
• PPTP Address: Specify the IP address
• PPTP Subnet Mask: Specify the subnet mask for the IP address.
• PPTP Gateway IP Address: Specify the IP address of the PPTP gateway.
• PPTP Server IP Address: If the PPTP Server's IP address is different from the default
gateway, then you may specify it here.
• User Name: Specify the user name which is provided by your ISP.
• Password: Specify the password which is provided by your ISP, and then verify it once
again in the next field.
• Click on the Next button to continue.
• The WAN configuration is complete. Click on the Connect button to connect to the
Internet.

3.1.4 L2TP (Layer 2 Tunneling Protocol)

The WAN interface can be configured as L2TP. L2TP (Layer Two Tunneling Protocol) uses a
virtual private network to connect to your ISP. This method of connection requires you to
enter a user name and password (provided by your Internet Service Provider) to gain
access to the Internet. The supported authentication protocols are PAP and CHAP.
18
User Manual