Appendix B: Troubleshooting - Rosewill RGS-1024 User Manual

24-Port Gigabit Ethernet Switch

Appendix B: Troubleshooting

1. The Power LED is not lit
Make sure the AC power cord connected the Switch with
power source properly.
Make sure the power source is ON.
2. The Link/Act LED is not lit when a device is connected to
the corresponding port
Make sure that the cable connectors are firmly plugged into
the Switch and the device.
Make sure the connected device is turned on and working
well.
The cable must be less than 100 meters long (328 feet).
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete
warranty information and future support for your product.
Rosewill Customer Service Hotline: 1-800-575-9885
Rosewill Customer Service Support:
techsupport@rosewill.com
RGS-1024
-15-
User Manual
7109504170