Rosewill RGS-1024 User Manual page 11

24-Port Gigabit Ethernet Switch
Figure 2-2 Fasten the Switch in the rack
2.3 Power On
RGS-1024 24-port Gigabit Ethernet Switch is powered by AC
power supply. Powering on the Switch, it will automatically
initialize and its LED indicators should respond as follows:
1） All of the Link/Act and 1000Mbps LED indicators will flash
momentarily for one second, which represents a resetting of
the system.
2） The Power indicator will light up.
If the LED indicators don't respond as described above, please
check the power supply and connection.
RGS-1024
-10-
User Manual