How To Replace The Extension Table; How To Change The Upper Looper Position - Janome CompuLock Instruction Book

2
1
3
1
51

How to Replace the Extension Table

The visual touch screen will indicate when you
should replace the extension table.
Open the looper cover and pull off the
extension table (A). Snap the extension table (B)
onto the looper cover .
1 Extension table (A)
2 Looper cover
3 Extension table (B)
* Make sure both the upper looper and the
upper knife have been dropped to their
lowest positions (deactivated), replace the
needle plate, pressure foot and move the
chaining finger to "R" position before
attaching the extension table (B).
* Replacement of the extension table is
required for the cover stitch and double chain
stitch sewing.
How to Change the Upper Looper
Position
The visual touch screen will indicate when it is
necessary to activate or deactivate the upper
looper.
Turn the upper looper release dial to the right
to activate.
Turn the upper looper release dial to the left to
deactivate (lowest position).
1 Upper looper release dial