Rolled Hem 3 - Janome CompuLock Instruction Book

1
5
2
3
1
5
3
2
6
7 8
4
4
Rolled Hem 3, Narrow Hem and
Picot Edge
Adjusting the thread tension may be required
depending on the type of fabric and thread
being used.
To begin with, select the automatic thread
tension display screen of the each stitch
patern to sew a test piece.
If the tension balance on the test piece is not
satisfactory, you can adjust the thread tension
manually, as follows:

Rolled Hem 3

Correct Tension
The illustration at left shows sewing results with
correct tension settings.
9
Wrong tension
The illustration shows the sewing results when
the right needle thread tension is too loose.
Remedy:
Tighten the right needle thread tension.
1 Wrong side of fabric
2 Right side of fabric
3 Right needle thread
4 Upper looper thread
5 Lower looper thread
6 Manual thread tension display screen
7 Right needle thread tension
8 Upper looper thread tension
9 Lower looper thread tension
- For better results -
Pull the end of thread chain to the back lightly
at the beginning and end of sewing.
41