Janome CompuLock Instruction Book page 24

3
4, 5
6, 7, 8, 9, 10
10 -A
9
10 -B
11
3
4
5
6
7
8
12
12
11
3 Hold the thread at both ends and tug gently
to ensure the thread is correctly inserted in
the thread tension unit.
3 Thread tension unit
4 Pass the thread through the right side of the
looper thread guide.
4 Looper thread guide
5 Pass the thread through the double chain
looper thread guide (1).
5 Double chain looper thread guide (1)
6–9
Pass the thread through points 6 though 9,
as illustrated.
10 Pass the thread through the lower looper
thread guide (10-A) or double chain
looper thread guide (10-B).
Use lower looper thread guide (10-A) for
overlock 5 and double chain.
Use double chain looper thread guide (10-
B) for cover stitch.
11 Turn the handwheel toward you to move the
double chain looper to about mid stroke
from left to right.
Then, push down the double chain looper
thread guide with your finger, as illustrated,
so that the double chain looper thread
guides moves to the right for easy threading.
11 Double chain looper thread guide (3)
12 Pass the thread through the looper thread
guides, as shown.
Holding the tip of the thread, push the double
chain looper thread guide up by right hand
11
to return it to the original position, as
illustrated.
Double chain looper thread guides will return
to their original position automatically when
you turn the handwheel toward you.
12 Double chain looper thread guide (4)
22