Janome CompuLock Instruction Book page 15

2
3
4, 5, 6
6
5
7, 8
8
2
3
4
7
2 Slide the thread under the top cover thread
guide second from the right side, as illustrated.
2 Top cover thread guide
3 Hold the thread at both ends and tug gently
to ensure the thread is correctly inserted in
the thread tension unit.
3 Thread tension unit
4 Pass the thread through the center of the
looper thread guide, as illustrated.
4 Looper thread guide
5, 6
Pass the thread through the two lower looper
thread guides, as shown.
5 Lower looper thread guide (1)
6 Lower looper thread guide (2)
7 Pass the thread through the looper thread
take-up lever (lower).
8 Pass the thread through the lower looper
thread guide (3), as illustrated.
7 Looper thread take-up lever (lower)
8 Lower looper thread guide (3)
13