Formatting An Sd Memory Card - Roland CD-2u Owner's Manual

Formatting an SD Memory Card

If an SD memory card has been used on a computer or other device, and any data remains on
that SD memory card, there will be correspondingly less available recording time. By
formatting the SD memory card, you can erase all data from the card, ensuring that the full
capacity of the card will be available for recording.
● Never turn off the power or disconnect the SD cards or SDHC cards while the screen
indicates "Processing..."
● When you format an SD memory card, all data stored on that card will be erased. Content
lost in this way cannot be recovered. Please use this operation with caution.
1
Insert the SD memory card that you want to format.
2
Press the [MENU] button to access the menu screen, and choose
"Format?"
3
If you're sure you want to proceed, press the [ENTER] button.
fig.format-mssg01-e.eps
4
If you're still sure you want to proceed, press the [ENTER] button.
(Note that the process cannot be interrupted once you've started it. If you decide that
you don't want to begin the process, press the [EXIT] button.)
fig.format-mssg02-e.eps
The screen will show "Processing..," and the card will be formatted.
When formatting is completed, you're returned to the audio source screen.
You can't format an SD memory card if its write protect switch (Page 26) is in the "LOCK"
position.
Note
fig.menu-format-e.eps
Important
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose "Format?"
Press the [ENTER] button to confirm your choice.
119