Roland CD-2u Owner's Manual page 53

6
Press the [ ] (Record) button to enter recording-standby mode.
fig.rec-intmic04-e.eps
7
Press the [
8
Play back your audio device (e.g., cassette deck).
The song being played will be recorded.
9
Press the [ ] (Stop) button to stop recording.
fig.rec-intmic06-e.eps
The recorded song will be added to the end of the SD memory card or CD-R/RW disc.
If you want to listen to the song you recorded, press the [
immediately after you stop recording.
Important
Sound will not be produced from the speakers while in recording-standby mode or while
●
recording. If you want to listen to the sound that's being recorded, you'll need to use
headphones. (Refer to Step 4 on Page 41.)
● When turning the [LINE] knob, you may hear a faint noise when the input level changes,
but this is not a malfunction.
● When connection cables with resistors are used, the volume level of equipment connected
to the inputs (EXT MIC (L, R), LINE IN) may be low. If this happens, use connection cables
that do not contain resistors.
Important
If you've finished recording a CD-R/RW disc and would like to play that disc on another CD
player, you'll need to execute the "Finalize" operation. You can finalize the CD-R/RW disc
when ejecting it. For details, refer to "Making a CD-R/RW Disc for Playback on Another CD
Player (Finalize)" (Page 99).
Recording a Cassette or Digital Audio Player
Blinking
] (Play) button to begin recording.
Lit
Remote control
Remote control
Remote control
] (Play) button
(continued)
53