Roland CD-2u Owner's Manual page 128

Troubleshooting
(continued)
CD-Related Problems
Problem
Can't insert a CD
Normal playback does
not work
Insufficient playback
volume
128
●
Could you be using batteries?
If you're operating the CD-2u/SD-2u on batteries, no CD-related
operations can be performed.
➔
Use the dedicated AC adaptor.
●
Is the audio source set to "CD"?
➔
Press the [CD] button to choose "CD" as the audio source.
●
Could the CD be upside down?
➔
Insert the CD with the label facing upward.
●
Could you have inserted a CD on which nothing has been recorded?
➔
Insert a different disc.
●
Could you be using repeat playback?
➔
Turn the repeat setting "Off" so that the
shown.
●
Could you be using A-B Repeat playback?
➔
Press the [REPEAT] button to get the A-B Repeat icon (
➔
Alternatively, press the [
playback will be defeated.
●
Could the playback speed be turned on?
➔
Turn the Speed setting "off."
●
Could the pitch setting be turned on?
➔
Turn the Pitch setting "off."
●
Could the key setting be turned on?
➔
Turn the key setting "off."
●
Could Center Cancel be turned "On"?
➔
Turn the Center Cancel setting "off."
●
Could the CD be damaged?
➔
Try playing a different CD.
●
Could the [ ] (Play) button be blinking?
➔
If the button is blinking, the CD is paused. Press the [
button to defeat pause.
●
Could the CD playback level be turned down?
➔
Use SD/CD Level to raise the playback level.
Cause and Action
or
] (Stop) button to stop playback. A-B Repeat
See
Page
22
70
29
—
symbol is not 79
) to disappear. 80
77
76
75
78
—
] (Play) 70
55