Roland CD-2u Owner's Manual page 61

Layering Your Performance onto an SD Memory Card Song and Recording It
7
Press the [
When the SD memory card song you selected in Step 4-
on the SD memory card will begin simultaneously. Start your performance.
fig.overdub-SD03.eps
Remote control
8
Press the [ ] (Stop) button to stop recording.
The recorded song will be added to the end of the SD memory card. If you want to listen
to the song you recorded, press the [
recording.
fig.overdub-SD03.eps
Important
● "Key" (Page 75), "Pitch" (Page 76), and "Speed" (Page 77) settings will automatically
revert to the values of the original song only during recording. When recording ends,
these settings will return to the values you specified.
Sound will not be produced from the speakers while in recording-standby mode or while
●
recording. If you want to listen to the sound that's being recorded, you'll need to use
headphones. (Refer to Step 4 on Page 41.)
● The playback level ("SD/CD Level") setting is common to the CD and the SD memory
card. When you turn off the power, this setting will return to "0."
If you decide to stop recording midway through the track, press the [
●
] (Play) button to begin recording.
Lit
] (Play) button immediately after you stop
begins playing, recording
During recording, the upper right
of the screen will show "SD → SD."
Remote control
] (Stop) button.
(continued)
61