Trouble Shooting - iHome SMARTDESIGN iC16 series Instruction Manual

Symptom
Unit doesn't AC adaptor isn't plugged into a
wall outlet or the connector is
respond
not plugged into the power
(no power)
supply jack on the back of the
unit
Wall outlet is not functioning
Batteries are weak/dead
Android
Unit is operating on batteries /
doesn't
not connected to AC adaptor
charge up
Android USB cable is not
properly connected and/or USB
Mode Switch needs to be
switched
Android is locked up/frozen
Android battery has problem
Sound is Volume level is set too high
distorted
Sound source is distorted
Batteries are weak/dead

Trouble Shooting

Possible Problem
Plug the AC adaptor into a wall outlet and plug
the connector into the supply jack on the unit
Plug another device into the same outlet to
confirm the outlet is working. Turn on any switch
that controls the outlet.
Replace current batteries with fresh ones
Unit will not charge Android when running on
batteries.
Connect unit to AC adaptor to charge Android.
Make sure the USB cable is properly and securely
connected to the USB port on the back of the
unit. Try moving the USB Mode Switch to a
different position.
Please refer to your Android manual for details.
Please make sure your Android is working
properly before connecting to unit.
Decrease the volume.
If Android original sound source is poor quality,
distortion and noise are easily noticed with
high-power speakers.
Try a different file from a trusted source such as
iTunes.
Replace current batteries with fresh ones
9
Solution