Map Descriptor Example 16 - Read Remaining Step Time; Map Descriptor Example 17 -Read Start Step; Map Descriptor Example 18 - Set Start Step = Step_Num; Map Descriptor Example 19 - Read Start Time Enabled - FieldServer Envirotronics SystemsPlus FS-8700-88 Driver Manual

FS-8700-88 Envirotronics SystemsPlus
4.4.19.

Map Descriptor Example 16 - read remaining step time

// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Scan_Interval,
Rm_Stp_Tm, 0s,
The retrieved remaining step time will be stored as follows in Data_Array_Name:
Offset from Data_Array_Offset
0
1
2
4.4.20.

Map Descriptor Example 17 -read start step

// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Scan_Interval,
Start_Step, 0s,
4.4.21.

Map Descriptor Example 18 - set start step = step_num

// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Data_Array_Name,
Start_Step, Start_Step_0,
The step_num must be written into Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.22.

Map Descriptor Example 19 - read start time enabled

// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Scan_Interval,
Start_Time_Ena, 0s,
The start time enabled status will be stored as 1 for "Enabled" or 0 for "Disabled" in Data_Array_Name at Data_Array_Offset.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Data_Array_Name, Data_Array_Offset,
Rem_Steptime, 0,
Description
Hour
Minute
Second
Data_Array_Name, Data_Array_Offset,
Start_Step, 0,
Data_Array_Offset,
0,
Data_Array_Name, Data_Array_Offset,
Start_Time_Ena, 0,
Page 15 of 49
Function, Node_Name,
rdbc, SYSPLUS_01,
Function, Node_Name,
rdbc, SYSPLUS_01,
Function, Node_Name,
wrbx, SYSPLUS_01,
Function, Node_Name,
rdbc, SYSPLUS_01,
SysPlus_Data_Type, Length
Rem_Step_Tim, 3
SysPlus_Data_Type, Length
Start_Step, 1
SysPlus_Data_Type, Length
Start_Step, 1
SysPlus_Data_Type, Length
Start_Time_Ena, 1