Map Descriptor Example 9 - Read Initial Setpoint Channel; Map Descriptor Example 10 - Set Initial Setpoint Channel = Value; Map Descriptor Example 11 - Read Program Status - FieldServer Envirotronics SystemsPlus FS-8700-88 Driver Manual

FS-8700-88 Envirotronics SystemsPlus
4.4.12.

Map Descriptor Example 9 - read initial setpoint channel

// Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name, Scan_Interval,
Init_Setpoint_00, 0s,
The channel is specified by the "Address" field.
4.4.13.

Map Descriptor Example 10 - set initial setpoint channel = value

// Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name, Data_Array_Name,
Init_Setpoint_00, Init_Setpoint_0,
The channel is specified by the "Address" field; value is retrieved from the value written into Data_Array_Name at Data_Array_Offset.
4.4.14.

Map Descriptor Example 11 - read program status

// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Scan_Interval,
Prg_Sts, 0s,
The program status will be stored to Data_Array_Name at Data_Array_Offset with one of the following possible values:
Program Status VALUE
0
Undefined
Timed Start 1
Alarm Hold 2
Hold 3
Run 4
Timed Stop 5
Stop 6
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Data_Array_Name, Data_Array_Offset,
Init_Setpoint, 0,
Data_Array_Offset,
0,
Data_Array_Name, Data_Array_Offset,
Prog_Status, 0,
Page 13 of 49
Function, Node_Name,
rdbc, SYSPLUS_01,
Function, Node_Name, SysPlus_Data_Type,
awt, SYSPLUS_01, Init_Setpoint,
Function, Node_Name,
rdbc, SYSPLUS_01,
SysPlus_Data_Type, Address,
Init_Setpoint, 0,
Address, Length
0, 1
SysPlus_Data_Type,
Prog_Status,
Length
1
Length
1