Cloning; Displayed Message - Icom IC-A210E Instruction Manual

6

CLONING

D Data cloning
Cloning allows you to quickly and easily transfer the
programmed contents or data from a PC to a transceiver
using the optional CS-A210
Data can be cloned to and from a PC (IBM compatible)
using the optional CS-A210
tional OPC-1529R
Consult the CS-A210 instruction manual and HELP file for
details.
D Displayed Message
• While clone writing.
• When clone writing is finished properly.
26
.
CLONING SOFTWARE
CLONING SOFTWARE
(connect with the data jack).
CLONING CABLE
CLONE
WRITE
CLONE
WRITE OK
• When clone writing error occurs.
and the op-
• While clone reading.
• If an error occurs while cloning, the following message ap-
pears when the power is turned OFF and then ON. In this
case, re-cloning or re-writing the data correctly is neces-
sary to cancel the error.
CLONE
WRITE ERR
RX
MEMORY
CLONE
127.00
READ
CLONE
READ
CLONE
NO DATA