Ricoh RDC-6000 Operation Manual page 60

i Press the shutter release button to take the picture.
When calibrating the white balance (W/B CALIBRATION)
e Press the
[W/B CALIBRATION] and then press
the MENU
r Press the shutter release button.
Place paper that passes nearly colorless light
in front of the lens.
Setting will end and the SET menu will return
when the shutter release button is pressed.
t Press the ENTER
return to the record menu.
Press the CANCEL
y Press the shutter release button to
take the picture.
Important
• Even with the same subject, the color balance can differ depending on the
Note
weather and type of light source (Tungsten or fluorescent).
• The white balance may not be correct in the Auto mode when a subject
Note
includes few white areas. In such cases, place some white object near the
subject when taking the picture.
• The flash will not fire when Daylight, Tungsten, Cloudy (overcast),
Fluorescent or User Settings is used.
• White balance can only be set while in the record mode. Setting is not
possible in the Play mode.
• Set Save Mode to save the white balance setting. Reference
"Keep Settings".
58
and buttons to select
button.
Adjust
button to
OK
EXIT
button.
MENU
[WHITE BALANCE]
AUTO
DAY LIGHT
TUNGSTEN
OVERCAST
FLUORESCENT
USER DEFINE
W/B CALIBRATION
W
Cancel Adjust
MENU
[W/BCALIBRATION]
PLACE A WHITE
PAPER IN FRONT
OF LENS!
START:RELEASE
Cancel
page 94
OK