Connecting To A Tv - Ricoh RDC-6000 Operation Manual

Tips
LCD Monitor Display Function
Press the ENTER button to display information, such as the date and
time recorded, on the LCD monitor. Each time you press the ENTER
button, the display will change in the following sequence:
Full Information
100–0048
17:12 2000/05/17

Connecting to a TV

Connect the camera to a TV set with the video interface cable supplied to play
recorded image files on the TV screen.
Important
• Please refer to the instruction manual for the equipment to which the
Note
camera is connected.
Image input
q Check that both the camera and the TV are turned off.
w Open the camera's terminal cover and connect the video interface
cable to the video out terminal.
e Connect the other end of the video interface cable to the Video In
terminal on the TV.
Using the Camera for Extended Periods of Time
Supplying power to the camera from a household AC outlet using AC adapter is
recommended for shooting over extended periods of time. See "Using an AC
Adapter" (p.27).
• Make sure that the camera is turned off before connecting the AC adapter.
• When you are away on overseas trips, you may view recorded images on a
Note
PAL TV set. See "Changing Video-out Signal Method (NTSC/PAL)" (p.97).
• The LCD monitor would appear blank if you connect the video interface
cable to the camera.
Selected Information
2/12 100–0048
1600 N
No Display
2/12
1600 N
3
73