Charging The Battery; Using An Ac Adapter - Ricoh RDC-6000 Operation Manual

Charging the Battery

When using for the first time and when the Battery mark (
adapter and charge the battery.
q Turn off the camera power.
Loading the Battery.
w Connect the AC adapter cable to the (DC IN) jack of camera.
e Insert the power plug into a power outlet.
The battery mark will appear on the LCD panel.
• Following table is the explanation for each battery mark type. When charging
Note
is completed, remove the power plug from the power outlet.
LCD panel
display
• Charging time for a full charge with an exhausted battery is approximately
3.5 hours.
• Battery mark is displayed in 5 steps depending on the remaining battery.

Using an AC Adapter

For extended recording and playback, connect the AC adapter and plug it into a power
outlet.
Important
• Always read Safety Precautions in this manual before using the AC
Note
adapter.
The remaining battery comes close to be exhausted.
Charge the battery.
When the capacity display of the battery mark becomes
full, charging is completed. (full charge)
) lights, use the AC
Explanation
1
27