Changing Camera Settings; Formatting Smartmedia - Ricoh RDC-6000 Operation Manual

Changing Camera Settings

The various camera settings can be changed in accordance with the method of usage.

Formatting SmartMedia

New SmartMedia and SmartMedia used in another device (personal computer, etc.)
can be formatted (initialized) by the camera.
Important
• Formatting SmartMedia erases all previously recorded files, including
Note
protected files.
• Do not use a personal computer to format (initialize) SmartMedia.
• In some cases, SmartMedia formatted by another device cannot be used.
q Insert the SmartMedia and then slide the
power switch to ON and set the Mode
dial to [SET].
The Set-up will be displayed.
• Page 30 "Inserting a SmartMedia
Note
Memory Card"
• Page 41 "Turning On the Camera"
w Press the
and
[FORMAT] and then press the ENTER
button.
Select
e Press the shutter release button.
The message "Formatting" will be displayed and
the SmartMedia will be formatted.
When formatting is completed, the Set-up will
return. Rotate the Mode dial and switch to
another mode.
• SmartMedia with a write protect pad attached cannot be formatted. Remove
Note
the write protect pad and then proceed with the formatting.
buttons to select
MENU[SET UP] 1/2
FORMAT
DATE SETTING
KEEP SETTINGS
AUTO POWER OFF
AUTO LCD OFF
LANGUAGE
VIDEO OUT MODE
Select
MENU
[FORMAT]
ALL IMAGES WILL BE
ERASED!!
START:RELEASE
Cancel
5
93