Ricoh VT2250 Operator's Manual page 49

OPERATION
Set your originals on the expo-
3
sure glass or in the optional
document feeder.
Make sure that the Master Mak-
4
ing indicator is lit and then press
the Start key. Check the image
position of the trial or proof print.
If the image position is not correct,
adjust it using the Image Position
keys ( see page 21) or the side
plate fine adjusting dial (
22).
Enter the number of prints using
5
the Number keys.
Make sure that the Print indicator
6
is lit and then press the Start
key.
41
see page