Ricoh VT2250 Operator's Manual page 130

The new master roll must be po-
5
sitioned as shown in the illustra-
tion.
Insert the paper edge of the mas-
6
ter roll under the arrow mark (1)
until you can see the leading
edge under the transparent
cover.
Return the pressure release lever
7
to its original position (2).
Rotate the spools backward to take
up any slack in the master.
Press the master cut button to
8
cut the leading edge of the mas-
ter roll.
NOTE:
When the master cut button is
pressed, the master roll will ro-
tate. Do not touch the master
roll.
After the beeper sounds, remove
9
the cut-off portion of the master
roll.
Remove the cut-off master com -
pletely to prevent master misfeed.
REPLENISHING SUPPLIES
122