Ricoh VT2250 Operator's Manual page 36

Select the desired reduction ratio
1
using the Reduce key.
If you want to return the ratio to 100
%, press the Full Size key.
Make sure that the original and
2
the print paper are the correct
size.
Set your originals on the expo-
3
sure glass or in the optional
document feeder.
Make sure that Master Making
4
indicator is lit and then press the
Start key. Check the image posi-
tion of the trial or proof print.
If the image position is not correct,
adjust it using the Image Position
keys ( see page 21) or the side
plate fine adjusting dial (
22).
Enter the number of prints re-
5
quired using the Number keys.
Make sure that the Print indicator
6
is lit and then press the Start
key.
see page
OPERATION
28