Ricoh VT2250 Operator's Manual page 25

OPERATION
Press the Start key.
5
A trial print is delivered to the paper
delivery table.
Press the Proof key and check
6
the image density and the image
position of the proof print.
If the image position is not correct,
adjust it using the Image Position
keys or the fine adjustment dial.
( See pages 21 and 22.)
If the image density is slightly dark or
light, adjust the image density by
pressing the Speed keys. (
page 24.)
Enter the number of prints re-
7
quired using the Number keys.
Up to 9999 prints can be entered at
one time.
To change the number entered,
press the Clear key and then enter
the new number.
Make sure the Print indicator is
8
lit and then press the Start key.
After printing is completed, the same
number of prints is automatically set
for the next job.
If you want to stop the machine dur -
ing a print run, press the Stop key.
17
See