Ricoh VT2250 Operator's Manual page 111

CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
SP No.
21 Prints/Master Cost
22 Print Program Class
23 Clear 1 Touch Class
24 Clear CS Mode
103
Mode
The optional key counter usually counts the
number of copies made regardless of the number
of masters used. For accounting purposes, it is
possible for the key counter to be incremented by
a value between 0 and 50 whenever a new
master is used.
Example:
The key counter is adjusted to increase by 20 for
each master fed. If 100 copies have been made
and the master is replaced, the key counter will
increase by 120.
You can select the order of print when printing
using One Touch Class mode.
If you select "0: First", the machine start printing
from the first class you have selected. If you
select "1: Last", the machine start printing from
the last class you have selected.
By default, after making prints with One Touch
Class, the classes that you have selected remain
selected ready for the next printing. If you want to
set the machine to clear the classes after
printing, select "1".
By default, pressing the Clear Modes key does
not clear the SP modes registered in the CS
Mode keys. If you want to clear the SP modes
that are registered in the CS Mode keys by
pressing the Clear Modes key, select "1".
Function
Default: 0
Default: 0: First
Adjustment value:
Default: 0
Adjustable value:
Even if you select "1" in this mode, the classes are
not cleared when the next originals are set in the
optional document feeder.
Default: 0
Adjustable value:
0: First 1: Last
0: No 1: Yes
0: No 1: Yes