Ricoh VT2250 Operator's Manual page 115

CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
SP No.
Total User Code
123
Clear Total User
124
Code Count
160 Side Erase
161 Center Erase
162 Horizontal Erase
170 Erase.
171 Erase.
172 Erase.
107
Mode
Displays the total number of masters and prints
for all the 20 user codes.
Count
Clears the total user code counter.
Adjust the default side edge margin width in Edge
Erase and Center Erase mode.
Adjust the default center margin width in Center
Erase mode.
Adjust the default horizontal edge (top and bottom)
margin in Edge Erase and Center Erase mode.
If you want to frequently use non-standard sized
1 originals in Edge Erase and Center Erase/Edge
Erase mode, you can program up to 3 sizes.
2
3
Function
M: Number of masters
P: Number of prints
Default: 0
Adjustment value:
Default: Metric version: 5 mm
Inch version: 0.2"
Adjustable value:
Default: Metric version: 10 mm
Inch version: 0.4"
Adjustable value:
Default: Metric version: 5 mm
Inch version: 0.2"
Adjustable value:
Default: Metric version: 0 x 0 mm
Inch version: 00.0" x 00.0"
Adjustable range:
Metric version: (100 ~ 258 mm) x (100 ~ 364 mm)
Inch version: (4.0" ~ 10.0") x (4.0" ~ 14.3")
0: No 1: Yes
Metric version: 2 ~ 20 mm
Inch version: 0.1" ~ 0.8"
Metric version: 4 ~ 60 mm
Inch version: 0.2" ~ 2.3"
Metric version: 2 ~ 20 mm
Inch version: 0.1" ~ 0.8"