Pneumatic Damper Actuator Parts And Accessories - Honeywell Pneumatic Controls Engineering Manual

Pneumatic Damper Actuator Parts and Accessories

Product Number Description
14000716-001 Internal, Normally Closed, Motor Mounting Kit with Right Drive
Ear, For MP909E and MP918.
14001213-001 MP904A and B Diaphragm
14002061-001 Damper Linkage Kit w/ Template
14002850-001 Angle Bracket 5 3/8 in, 137 mm, long, 5 in, 127 mm, wide
14003640-001 Angle Bracket 3 in. (76 mm) long, 3 3/4 in. (95 mm) wide, 2 3/
4 in. (70 mm) high
14003820-019 MP516 Bracket and Linkage Assembly
14004062-001 External Trunnion Mounting Bracket
14004062-002 Internal N.C. Trunnion Mounting Bracket
14004062-003 Internal N.O. Trunnion Mounting Bracket
14004106-001 Actuator pushrod for conversion of internal N.C. to external
14004106-002 Push rod assembly for internal N.C.
14004107-001 Crankarm Assembly for conversion from internal N.C. to
external Trunnion mounting
14004136-001 MP904 Positive Positioner Retrofit Kit
14004137-001 Retrofit Kit for adding positive positioner to MP909E or repair
of MP909H
14004210-001 Feedback Spring Kit includes orange spring (3 psi [21kPa]),
yellow spring (5 psi [34 kPa]), and blue spring (10 psi [69
kPa]).
14004236-001 Coupler, actuator shaft to 5/16 in, 8 mm, pushrod
14004237-002 Bag assembly including 4 hex head slotted drill point screws
(14004513-001)
14004241-002 Hitch Pin (Six Sets)
Used With
MP909E,H
MP904A,B
MP909E,F
MP909D,E
MP913; MP909D
MP516; MP909D
MP918A,B; MP909E,H
MP918A,B; MP909E,H
MP918A,B; MP909E,H
MP918A,B; MP909E,H
MP918A,B; MP909E,H
MP918A,B; MP909E,H
MP904A
MP909E; MP909H
MP909H; MP918A
MP918;
MP918A,B; MP909E,H
MP918A,B; MP909E,H
70-6925
Damper Actuator
14003640
M11504
14004107
M11530
14004210
M11532
83