Pneumatic Temperature Controller Accessories; Pneumatic Temperature Controller Replacement Parts; Temperature Controller - Honeywell Pneumatic Controls Engineering Manual

Pneumatic Temperature Controller Accessories

Product Number Description
14000786-001 Receiver Gauge, 25 F-125 F scale, 1 1/2 in. diameter, 1/8 in. NPT connection RP920;
14000786-002 Receiver Gauge, -5 to 55 C scale, 1 1/2 in. diameter, 1/8 in. NPT connection
14000786-003 Receiver Gauge, 15 to 75% RH scale, 1 1/2 in. diameter, 1/8 in. NPT
connection
14000786-004 Receiver Gauge, 65 to 95% RH scale, 1 1/2 in. diameter, 1/8 in. NPT
connection
14000786-005 Receiver Gauge, 15 to 85% RH scale, 1 1/2 in. diameter, 1/8 in. NPT
connection
14002696-001 Repair kit including filters, screens, washers, gaskets, O-rings, and restrictors
for RP908A and RP908B controllers
14004278-002 Compensation module with gasket for RP920B and RP920D
14004322-001 DIN Rail Mount
14505694-003 13 3/4 inch (350 mm) long mounting rail for RP920
14505694-004 17 3/4 inch (450 mm) long mounting rail for RP920
305616 1-1/2 in. diameter, 1/8 NPT center stem back mount Receiver gauge (0 to 2 in.
w.c. scale) with +/- 2% accuracy
305617 1-1/2 in. diameter, 1/8 NPT center stem back mount Receiver gauge (1.0 to
3.0 in. w.c. scale) with +/- 2% accuracy
305929 1-1/2 in. diameter, 1/8 NPT center back stem mount Receiver gauge (-40 to
+160 F scale) with +/- 2% accuracy
305930 1-1/2 in. diameter, 1/8 NPT center back stem mount Receiver gauge (0 to 200
F scale) with +/- 2% accuracy
305931 1-1/2 in. diameter, 1/8 NPT center back stem mount Receiver gauge (40 to
240 F scale) with +/- 2% accuracy
305965 1-1/2 in. diameter, 1/8 NPT center stem back mount Pressure Indicating
gauge (0 to 30 psi scale) with +/- 4% accuracy
305972 Receiver gauge, 1-1/2 in. 1/8 NPT center back, temperature 50 to 100F
43188057-010 Clear plastic cover for all RP920A pneumatic controllers
43188123-010 Clear plastic cover for all RP920B, RP920C, RP920D pneumatic controllers
CCT813 Slide Rule for Calculating Pneumatic Controller Settings for all RP908 and
RP920's.

Pneumatic Temperature Controller Replacement Parts

Product Number Description
14003757-001 Seal screw for port 8 and O-ring repair parts for RP920
14004277-003 Setpoint module with gasket with CPA for RP920
14004286-002 Zinc plated metric machine screw, M3x0.5., 19 min., 26 - 0.8
14004533-001 Connector block with gasket and CPA for RP920
43188059-001 Setpoint knob for all RP920 pneumatic controllers
43915905-110 O-ring for filter in RP920
Temperature Controllers
Used With
RP920;
RP920;
RP920;
RP920;
RP908;
RP920;
RP920;
RP920;
RP920;
RP920;
RP920;
RP920;
RP920;
RP920;
RP920;
RP920;
RP920;
RP920;
RP908;
RP920;
70-6925
Used With
RP920;
RP920;
RP920;
RP920;
RP920;
RP920;
37