Engine Oil; Hoisting The Outboard Motor - Honda Marine BF200A Owner's Manual

STORAGE
4. Tilt up the outboard motor.
5. Tilt down the outboard motor, and
drain the vapor separator.
6. After draining thoroughly, tighten
the drain screw securely.
7. Clip the drain hose on the head
cover.
8. Drain the fuel tank into an
approved gasoline container, or if
you need to store fuel in the fuel
tank, you can extend fuel storage
life by filling the fuel tank with
fresh gasoline and adding a fuel
stabilizer that is formulated for
that purpose.
78

Engine Oil

1. Change the engine oil and the oil
filter (p. 59 61 ).
2. Remove the spark plugs (p.
and remove the clip from the
emergency stop switch.
3. Pour a tablespoon (5
clean engine oil into each cylinder.
4. Rotate the engine a few
revolutions to distribute the oil in
the cylinders.
5. Reinstall the spark plugs (p.
HOISTING THE OUTBOARD
MOTOR
64 ),
3
10 cm ) of
1. Unlock and remove the engine
cover.
65 ).
ENGINE COVER
LATCH