Top-Mount Type - Honda Marine BF200A Owner's Manual

If the engine is not properly
warmed-up bef ore raising the engine
speed, the warning buzzer and
overheat warning lamp may activate,
and the engine speed will be
automatically reduced.
During the warm-up period, check
the oil pressure indicator (p.
overheating indicator (p.
cooling system indicator (p.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS,
p. 82 .
5. If the fast idle control was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.

Top-Mount Type

EMERGENCY STOP
SWITCH
29 ),
29 ), and
30 ).
SWITCH CLIP
1. Put the switch clip in the
emergency stop switch, and attach
the lanyard to your PFD (Personal
Flotation Device) or to your wrist,
as shown.
The engine will not start or run,
unless the clip is in the switch.
The emergency stop switch clip
and lanyard system is a safety
device that will stop the engine if
you fall away from the controls
while operating the boat.
Always attach the lanyard to your
PFD, or to your wrist, before
starting the engine.
LANYARD
OPERATION
41