SERVICING YOUR OUTBOARD MOTOR
ENGINE OIL FILTER
FUEL FILTER (inside strainer cup)
2.
Looking through the translucent
strainer cup, check the fuel filter
for water accumulation or
sediment.
70
SCREW (3)
FUEL HOSES
SUSPENSION STRAP
3.
Remove the suspension strap from
the strainer bracket, then remove
the strainer assembly from the
strap.
Before removing the fuel filter, to
prevent fuel leakage, place fuel
hose clamps on the fuel hoses on
each side of the fuel filter.
4.
Remove the three screws and
separate the fuel strainer cup from
the strainer body.
5.
Thoroughly clean the strainer cup,
and replace with a new fuel filter.
6.
Reassemble the strainer body and
the cup.
STRAINER TIGHTENING
TORQUE:
3.4 N·m (0.35 kgf·m , 2.5 lbf·ft)
7.
Reinstall the strainer in the original
position.