Stopping The Engine; Emergency Engine Stopping - Honda Marine BF200A Owner's Manual

N (neutral)
CONTROL
LEVER
FAST IDLE BUTTON
4. Before getting under way, allow
the engine to warm up sufficiently
to ensure good performance.
Above 41°F (5°C), warm up the
engine for 2 or 3 minutes.
Below 41°F (5°C), warm up the
engine for at least 10 minutes at
2,000 rpm. Push the fast idle
button then move the control lever
forward or reverse to open the
throttle and achieve approximately
2,000 rpm.
If the engine is not properly
warmed-up bef ore raising the engine
speed, the warning buzzer and
overheat warning lamp may activate,
and the engine speed will be
automatically reduced.
During the warm-up period, check
the oil pressure indicator (p.
overheating indicator (p.
cooling system indicator (p.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS,
p. 82 .
5. If the fast idle control was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.

STOPPING THE ENGINE

Emergency Engine Stopping

Side-Mount Type
EMERGENCY
STOP SWITCH
29 ),
29 ), and
30 ).
SWITCH CLIP
Panel-Mount/Top-Mount Types
EMERGENCY
STOP SWITCH
SWITCH CLIP
OPERATION
LANYARD
PULL
CONTROL PANEL
LANYARD
PULL
43