Operating The Controls; Engine Switch; Auger-Lock Indicator; Hour Meter - Honda HSS928A Owner's Manual

Hide thumbs Also See for HSS928A:
Table of Contents

Advertisement

Adjust the snow discharge chute to avoid hitting the operator,
bystanders, windows, and other objects with ejected snow. Stay clear
of the snow discharge chute while the engine is running.
Children and pets must be kept away from the area of operation to
avoid injury from flying debris and contact with the snow blower.
Refuel with Care
Gasoline is extremely flammable, and gasoline vapor can explode.
Allow the engine to cool if the snow blower has been in operation.
Refuel only outdoors in a well-ventilated area with the engine OFF. Do
not overfill the fuel tank. Never smoke near gasoline, and keep other
flames and sparks away. Always store gasoline in an approved
container. Make sure that any spilled fuel has been wiped up before
starting the engine.
Turn Engine OFF When Not Operating the Snow
Blower
If you need to leave the snow blower for any reason, even just to
inspect the area ahead, always turn the engine off.
Operation on Slopes
Do not use the snow blower on a slope greater than 20 degrees.
To avoid overturning, be careful when changing the direction of the
snow blower while operating it on a slope. Do not use the snow blower
to remove snow from angled roof tops. The snow blower may overturn
on steep slopes if left unattended, causing injury to the operator or
bystanders.
Operating Conditions
Do not use the snow blower when visibility is poor. Under conditions
of poor visibility, there is a greater risk of striking an obstacle or
causing injury. Adjust the snow discharge chute to avoid hitting
bystanders or vehicles.
Stay clear of the snow discharge chute while the engine is running
and be aware that loose clothing can get drawn into the moving parts.
Operating Near Roads
Always watch for vehicle traffic when operating the snow blower near
roads and driveways.
Operator Responsibility
Know how to stop the snow blower quickly in case of emergency.
Understand the use of all snow blower controls.
Never permit anyone to operate the snow blower without proper
instruction. Do not let children operate the snow blower. If people or
pets suddenly appear in front of the snow blower while it is in
operation, immediately release the auger and drive clutch levers to
stop the snow blower and avoid possible injury from rotating auger
blades.
While operating the snow blower, hold the handle firmly and walk,
don't run. Wear suitable winter boots that resist slipping.
Wear safety glasses or eye shields during operation to protect eyes
from thrown objects.
Exercise caution on slippery surfaces to avoid falling, especially when
operating in reverse.

Operating the Controls

Engine Switch

The engine switch controls the
ignition system. The key can only be
inserted and removed when turned
to the OFF position.
Recoil-starter Models
OFF – Stops the engine.
ON – Running position, and for
starting with the recoil starter.
Electric-starter Models
OFF – Stops the engine.
ON – Running position, and for
starting with the recoil starter.
START - Use this position to start the
engine with the DC electric starter.
The switch returns to the ON position
when you let go of the key.

Auger-lock Indicator

(HSS1332A Electric-starter
model)
OFF – The auger-lock indicator
is off.
ON – The auger-lock indicator
comes on.
START – After starting the auger-lock
indicator goes off.

Hour Meter

(HSS1332A Electric-starter
model)
OFF – The accumulated engine
running time indicator is OFF.
ON – The hour meter comes on, then the accumulated engine
running time is shown.
START – After starting, the dot of the hour meter blinks and the
engine running time is accumulated.
OFF
ON
RECOIL ENGINE SWITCH
ON
OFF
START
DC ELECTRIC
ENGINE SWITCH
AUGER-LOCK INDICATOR
HOUR
METER
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hss1332a

Table of Contents