Generac Power Systems Mobile Link Unit Owners And Installation Manual page 15

5. Disconnect battery black (-) cable. Then, the red (+) cable. See Fig-
ure 3.2.
6. Remove the controller sheet metal cover and fasteners. See Figure
3.3.
7. Attach and use the provided template to position the hole location.
Mounting hole location is critical for proper operation. 1" of the
Mobile Link unit antenna must be above the top of the generator
roof when installation is completed.
Mobile Link
Figure 3.2 - Removing Battery Cables
Figure 3.3 - Removing Controller Fascia
13