Section 4: Actition; Section 5 Maintenance; Activation; Cleaning - Generac Power Systems Mobile Link Unit Owners And Installation Manual

Section 4 Activation
Once the Mobile Link unit has been installed, it should be registered
and activated to obtain the full benefits of its capabilities.
The following information will need to be gathered prior to initiating
the registration process:
• E-mail address
• Model Directory Number (MDN) (located on the bottom of the
Mobile Link unit or on the box it came in)
• Mobile Equipment Identification Number (MEID) (located on
the Mobile Link unit's box)
• Generator's serial number (located on the label plate, near
the control panel console)
• Mailing address
• Valid credit card
• Address of the generator's location (if different than the
mailing address)
Go to www.StandbyStatus.com to complete the registration pro-
cess.
• Click "Sign Up".
• Enter the requested information when prompted.
• Once enrollment of the generator is complete, the Mobile Link
unit's top LED light will illuminate.

Section 5 Maintenance

5.1 - Cleaning

The Mobile Link unit requires no maintenance. To clean, wipe with a
damp cloth.
Note: Do not use any cleaning products or solvents.
22 Mobile Link