Saving And Restoring Teaming Configuration; Viewing Teaming Statistics; Linux Bonding/Failover/Aggregation - Qlogic 8200 Series User Manual
Converged network adapter
Hide thumbs
Also See for 8200 Series:
- User manual (300 pages) ,
- User manual (170 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
2–Configuring NIC
Teaming/Bonding
Saving and Restoring Teaming Configuration
QLogic recommends that you periodically save the configuration to prevent any
accidental loss of network topology and settings. Current configuration including
the teams, VLANs, and properties can be saved to a file. Restoring an earlier
configuration results in the destruction of the current configuration.
To save a configuration:
1.
On the Team Management page under Teams and Adapters, right-click
the Teams folder.
2.
On the shortcut menu, click Save to File.
3.
Enter a location to save the configuration.
To restore a configuration:
1.
On the Team Management page under Teams and Adapters, right-click
the Teams folder.
2.
On the shortcut menu, click Restore From File.
3.
Select a previously saved configuration file.
Viewing Teaming Statistics
You can view teaming and Ethernet statistics using the QConvergeConsole
(QCC) CLI utility.
To view teaming statistics, issue the following command:
qaucli -nic -statport
To reset the Ethernet statistics counter, issue the following command:
qaucli -nic -sreset [cna_port_inst]
To display Ethernet port statistics, issue the following command:
qaucli -nic -statport [cna_port_inst]
To undo the reset of Ethernet statistics counters, issue the following command:
qaucli -nic -sunreset [cna_port_inst]
Linux Bonding/Failover/Aggregation
The Linux qlcnic driver supports all the standard bonding modes supported by
the Linux bonding driver for bonding, failover, and aggregation. Refer to the Linux
bonding driver documentation for additional details on the bonding modes.
2-34
SN0054671-00 A
Advertisement
Table of Contents
Troubleshooting
