Quick Start; Installation Instructions; Step 1. Verify The Package Contents - Qlogic 8200 Series User Manual

Quick Start

Installation Instructions

This Quick Start section describes how to install and configure your new QLogic
converged network adapter in four simple steps:


Step 1. Verify the Package Contents

 Step 2. Install the Adapter Hardware
 Step 3. Install the Adapter Drivers
 Step 4. Install QConvergeConsole™
CAUTION!
Keep the adapter in the antistatic bag until installation. The adapter contains
parts that can be damaged by electrostatic discharge (ESD). Before
handling the adapter, use standard methods to discharge static electricity.
Place the adapter on the bag when examining it. Retain the bag for future
use.
Step 1. Verify the Package Contents
The QLogic adapter is shipped with the following items:
 Low-profile bracket
For more information on the 8200 Series Adapter package contents, go to the
following link, select Show+ under the QLogic 8200 Series, and then select
Ordering Information.
http://www.qlogic.com/Products/adapters/Pages/ConvergedNetworkAdapters.aspx
For more information on the 3200 Series Adapter package contents, go to the
following link, select Show+ under the QLogic 3200 Series, and then select
Ordering Information.
http://www.qlogic.com/Products/adapters/Pages/IntelligentEthernetAdapters.aspx
SN0054671-00 A PRELIMINARY xix