Qlogic SANbox 5600 Series Interface Manual page 286

14 – Command Reference
Set Setup Radius
Table 14-26. Common RADIUS Configuration Parameters (Continued)
Parameter
TotalServers
server [server_number]
Prompts you in a line-by-line fashion to configure parameters for the RADIUS
server given by [server_number]. [server_number] is a positive integer. To
configure common and specific RADIUS server parameters, omit the keyword.
Table 14-27
Parameter
ServerIPAddress
ServerUDPPort
DeviceAuthServer
UserAuthServer
AccountingServer
Timeout
Retries
SignPackets
Secret
14-112
Number of RADIUS servers to configure during this session. Set-
ting TotalServers to 0 disables all RADIUS authentication. The
default is 0.
describes the specific RADIUS server configuration parameters.
Table 14-27. Specific RADIUS Server Configuration Parameters
IP address (version 4 or 6) or DNS host name of the RADIUS
server. The default is 10.0.0.1.
User Datagram Protocol (UDP) port number on the RADIUS
server. The default is 1812.
Enable (True) or disable (False) this server for device authenti-
cation. The default is False.
Enable (True) or disable (False) this server for user account
authentication. A user authentication RADIUS server requires a
secure management connection (SSL). The default is True.
Enable (True) or disable (False) this server for auditing of activity
during a user session. When enabled, user activity is audited
whether UserAuthServer is enabled or not.The default is False.
The accounting server UDP port number is the ServerUDPPort
value plus 1. The default is 1813.
Number of seconds to wait to receive a response from the
RADIUS server before timing out. The default is 2.
Number of retries after the first attempt to establish communica-
tion with the RADIUS server fails. The default is 0.
Enable (True) or disable (False) the use of sign packets to pro-
tect the RADIUS server packet integrity. The default is False.
22-byte ASCII string used as a password for authentication pur-
poses between the switch and the RADIUS server.
Description
Description
S
59183-03 A