Remove Zones From A Zone Set; Activate A Zone Set; Deactivate A Zone Set; Managing Zones - Qlogic SANbox 5600 Series Interface Manual

7 – Zoning Configuration

Managing Zones

Remove Zones from a Zone Set

Enter the
in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset remove zoneset_1 zone_1 zone_2
SANbox (admin-zoning) #>zoning save

Activate a Zone Set

Enter the
following example:
SANbox #> admin start
SANbox (admin) #> zoneset activate zoneset_1

Deactivate a Zone Set

Enter the
disable zoning in the fabric:
SANbox #> admin start
SANbox (admin) #> zoneset deactivate
Managing Zones
Managing Zones consists of the following tasks:
Create a Zone
Delete a Zone
Rename a Zone
Copy a Zone
Add Members to a Zone
Remove Members from a Zone
All of these tasks require an Admin session and a Zoning Edit session.
7-16
Zoneset Remove command to remove zones from a zone set as shown
Zoneset Activate command to apply zoning to the fabric as shown in the
Zoneset Deactivate command to deactivate the active zone set and
S
59183-03 A