Add Members To A Zone; Remove Members From A Zone - Qlogic SANbox 5600 Series Interface Manual

7 – Zoning Configuration
Managing Zones

Add Members to a Zone

Enter the
following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone add zone_1 alias_1 1,4 1,5
SANbox (admin-zoning) #> zoning save

Remove Members from a Zone

Enter the
shown in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone remove zone_1 alias_1 1,4 1,5
SANbox (admin-zoning) #> zoning save
7-18
Zone Add command to add ports/devices to zone_1 as shown in the
Zone Remove command to remove ports/devices from zone_1 as
S
59183-03 A