Channel Selection Controls Area; Control Area - Q-See QSNDVR4R User Manual

again to clear the information display. When inputting numbers this button is used to key in number "8".
When in System Setup menus, this is a "decrease" button.
9. PTZ/9: Press this button to access in sequence the PTZ Control operations for speed domes. See
the section Pan-tilt-Zoom (PTZ) Operation in the User Guideline. Press once to access controls for the
first speed dome camera, press again to control the second speed dome, then the third, and finally the
fourth speed dome. Pressing again will exit PTZ Control. When inputting numbers this button is used
to key in number "9".
10. USB/0: USB key. Press this button starts USB video backup during playback. Refer to USB
Device Backup in the User Guideline section for details. When inputting numbers this button is used to
key in "0".
11. Menu: Menu access key. Press this button to enter the SETUP MODE Top Main Menu (a
password is needed). Press this key again to save settings and quit any current menu on the screen.
12. Schedule: Schedule key. Press this button to enter the Schedule Set state, set up in the
SCHEDULE SETUP menu. If the DVR is in schedule state, there will be an "S" on the screen. Press this
button again to quit schedule mode.

3. Channel Selection Controls Area

1. First Channel/UP: Press this button to see Channel 1 full screen. When selecting menu items,
press this button to move the cursor UP.
2. Second Channel/DOWN: Press this button to see Channel 1 full screen. When selecting menu
items, press this button to move the cursor DOWN.
3. Third Channel/LEFT: Press this button to see Channel 1 full screen. When selecting menu items,
4 Channel Digital Video Recorder
30