Alarm And Sensors Setup - Q-See QSNDVR4R User Manual

4 Channel Digital Video Recorder
If there is more than one DVR in a local area network, each DVR must be set to have an exclusive MAC
Address. There is only one chance to modify the MAC Address. Once MAC ADDRESS is changed,
this menu will not appear again. If you want to change the MAC ADDRESS again, the factory default
settings have to be reloaded with Factory Reset. When the cursor moves to FACTORY RESET in the
SYSTEM SETUP menu, press ENTER and will prompt to INITIALIZE. Entering YES, DVR settings
revert to default.
MAC addresses are 12-digit hexadecimal numbers (48 bits in length). For MAC ADDRESS, set the first
two byte sets to 00 00, and change the other bytes.

15. Alarm and Sensors Setup

When the cursor moves to SENSOR SET in the SETUP MODE Top Main Menu, pressing the ENTER
button results in the SENSOR SETUP menu window appearing. This is illustrated below. Press the
up or down arrow buttons to move the cursor. Press the up or down arrow buttons to move the cursor.
Press the "+"or "-" buttons on the remote, or in the front panel, to change the values.
21