Motion Detection Settings - Q-See QSNDVR4R User Manual

4 Channel Digital Video Recorder
The following Options are available in the SENSOR SETUP menu:
(1) CHANNEL SELECT: Select the channel to set up.
(2) ALARM ENABLE: Alarm trigger switch that can be set to OFF, LOW LEVEL or HIGH LEVEL; if
set to OFF, the DVR will ignore the alarm input. The default is OFF.
(3) MOTION ENABLE ： M otion alarm switch that can be set to ON or OFF; if set to OFF, the motion
alarm will be ignored.
(4) MOTION LEVEL: Motion sensitivity level. There are 5 options to choose from: VERY LOW, LOW,
NORMAL, HIGH, and VERY HIGH. If the moving (alarm triggering) object in the picture is small
relative to the monitor screen, set to HIGH or VERY HIGH. The default level is NORMAL.
(5) EVENT REC TIME: For how long the DVR records after the motion or sensor alarm is triggered.
The default value is 30 seconds.
(6) BUZZER SOUND: Buzzer sound duration when there is a sensor or motion alarm triggered. The
default value is one second.
(7) SCREEN SWITCH: If set to ON, when there is an alarm on any one channel, the screen will
automatically switch to full screen mode from that video channel. To deactivate this option, set to OFF.
(8) AREA SET: To set the picture area, from each channel, that can be motion detect enabled.
Note: Users should activate Schedule Set (explained below) after setting up these parameters to
activate the settings.

16. Motion Detection Settings

1) When surveying nearby objects (2-10 meters)
22