Q-See QSNDVR4R User Manual page 50

4 Channel Digital Video Recorder
Enter the IP address. Check the default set or input values for AV Port, Command Port, Channel Enable,
Video, etc. and click OK.
Click the "Connect" button in the main window. The Logon window appears. Enter the password and
click OK. The password is the same as the DVR password.
If the connection to the DVR is established the Connect OK window appears. Click the "Confirm"
button.
Note: When users navigate the Internet, they should first open ports 5000-5002 (default which can
be changed on the DVR) on the router side. Refer to the router manual.
The control buttons in the main Network Viewer window are:
1. PLAY: Click to start video play in the DVR
49