Information Display - Q-See QSNDVR4R User Manual

4 Channel Digital Video Recorder
Pressing again the PIP button will change the PIP mode. Pressing and holding the PIP button can set
each PIP picture. When one channel name is in yellow, push the left and right buttons to change the
selected channel. Pressing the "+" or "-" button changes this channel's picture from full screen to PIP.
Press the ENTER button to cancel this mode. Press any Channel Selection button to exit the PIP mode.

13. Information Display

Press the DISPLAY button in the front panel (or simply press the DISP key on the remote) and
information on the DVR will appear on the screen. This is illustrated below. For HDD, information
both for the MASTER and SLAVE disks is displayed.
42