Daily Inspection - Precor Discovery Selectorized Line Owner's Manual

Daily Inspection

You will need to perform the following tasks each day to maintain the
equipment and keep it operating smoothly:
 Clean any upholstery on the equipment.
 Inspect pads for wear.
 Clean and inspect equipment frames.
 Inspect cables and end connections for wear.
 Check warning and instructional labels.

Check that all fasteners are properly secured.
Perform the tasks that are appropriate for the equipment you are maintaining,
and skip the tasks that do not apply.
Clean Upholstery
To remove surface dirt and perspiration, clean upholstery daily with a mild
soap and water solution in a spray bottle. Spray upholstered surfaces lightly
and wipe dry with a clean cloth.
Important: To clean the upholstery, do not use cleaning products that have any of
these ingredients: solvents, alcohol, ammonia, or petroleum. Use a mild
detergent-based cleaner instead.
Discovery Selectorized Line Owner's Manual: Maintenance
Inspect Pads for Wear
Inspect pads for cracks in the upholstery, broken and loose stitching, loose
staples, and loose mounting bolts. Replace pads as needed (refer to Obtaining
Service to purchase new pads).
Important: Do not reupholster pads or use pads not approved by Precor.
Clean and Inspect Frames
To remove grease and dirt, clean frames daily with a mild soap and water
solution in a spray bottle. Wipe the equipment down with a damp cloth and
dry completely. Be sure to wipe down both painted parts and chrome or plated
parts.
To restore and maintain the luster of chrome parts, use a commercial chrome
cleaner.
As you clean, inspect the frames for cracks, rust, or other damage. Make sure
welds are solid and fasteners are properly secured.
26