Selecting The Language; Determining The Units Of Measure - Precor EFX546 Owner's Manual

Commercial efx series

Hide thumbs Also See for EFX546:

Owner's manual (40 pages)

Owner's manual (52 pages)

Owner's manual (47 pages)

Table Of Contents

Table of Contents

To access the Club settings, the following must occur:

Electrical power must be supplied.

The foot pedal speed must be maintained at 40 strides per minute. Or, the

optional battery recharger must be plugged into the EFX and connected to an

appropriate power source.

Check that the Precor banner appears on the display and maintain the

minimum stride rate.

Press the appropriate key sequences.

Important: To access Custom Club Mode, press Reset while the Precor banner is

displayed. Within 1/2 second, begin pressing the key sequences. If the system does

not detect a key press (within 1/2 second after Reset), it returns to the banner. Once

you begin entering a key sequence, each key must be pressed within four seconds of

the other or the Precor banner reappears and you have to begin again.

To change the language, select the units of measure, and set the maximum work-

out and pause times, press the following:

Reset, Resistance

Note: The

use the Cross Ramp

The functions of the display console keys while in Club Custom Mode are described

in the box below.

Display key functions within the Club Custom Mode

lets you scroll through the

various selections that appear.

Enter

saves the information being

displayed and moves to the

next aspect of the program.

Note: The touch-sensitive keys can be gently pressed and held to view several

selections. The longer the key is held down, the faster the numbers scroll past.