Selecting The Language - Precor EFX 556 Owner's Manual

Precor efx 556 rear drive elliptical trainer

Hide thumbs Also See for EFX 556:

Owner's manual (60 pages)

Owner's manual (44 pages)

Table Of Contents

Table of Contents

To access the Club settings, the following must occur:

❑ Electrical power must be supplied.

The foot pedal speed must be maintained at 40 strides per minute. Or, the

optional battery recharger must be plugged into the EFX and connected to an

appropriate power source.

Note: The optional battery recharger connection is highly recommended, if

you plan to customize the EFX.

❑ Check that the Precor banner appears on the display and, if necessary,

maintain the minimum stride rate.

❑ Press the appropriate key sequences within the allocated time.

To change the language, select the units of measure and set the maximum workout

and pause times press the following:

Important: To access Club Custom mode, press Reset while the Precor banner is

displayed. Within ½ second, begin pressing the key sequences. If the system does

not detect a key press (within ½ second after Reset), it returns to the banner. Once

you begin entering a key sequence, each key must be pressed within four seconds of

the other or the Precor banner reappears and you have to begin again.

The functions of the display console keys while in Club Custom mode are de-

scribed in the box below.

Display key functions within the Club Custom Mode

▼▲

lets you scroll through the

various selections that appear.

Enter

saves the information being

displayed and moves to the

next aspect of the program.

Note: The Reset key followed by the number keys, 5, 6, 5, 1, 5, 6, 5 may be

pressed instead of using the ▼▲ keys. But, in either case, Reset must be pressed

initially, for example: Reset, 5, 6, 5, 1, 5, 6, 5.