Playing Tapes Options - Zenith VRC4165 Operating Manual And Warranty

PLAYING TAPES (Playback. Options)
,%_
• POVV'IER • STOP
• EJECT
L.AUDtO-FI VIDEO
\
J
'--k J, I
[_ L_,==_ ='='==
jr"
/
Use these controls
Playing Tapes Options
(S(_ Remote Control and Additional Information Sections)
A. Pause Forward/Reverse Slow Motion Video
(While in Play mode) Press
PAUSE
twice, follow on-screen
instructions for slow motion. Press PLAY to resume playing
tape.
B.. Tape Rewind/Fast Forward
(While in Stop mode) Press and release REW
or F FWD.
Press STOP when tape reaches desired location.
C. Reverse/Forward Search
(While in Play mode) Press and release
REW or F FWD, and[
hold down REW or F FWD for Jet Search. Press PLAY to
resume playing tape.
D. Tracking Adjustment Auto/Manual
Your Zenith VCR automatically adjusts tracking when you
play a tape. If, however, the tape was recorded on a different
VCR, streaks (video noise) may appear. While the tape is
playing, press and hold down ADJUST, ADd (Left/Right) to
manually adjust the tracking.
E. Index Search
At the s_:art of each recording an Index mark is inserted on
the tape. Press SEARCH, then the number of the marks (1,
2, 3 etc.) that need to be passed to reach your desired
recording start location, then press F FWD or REW as
appropriate. Or, rewind the tape to the beginning and press
the number of marks from the beginning of the tape that will
get you to your recording start location, then press F FWD,
the VCR advances the tape to that location and begins play-
back.
F. Memory
Use to :zero Real-Time Tape Counter or turn on Memory
feature. When Memory is active, tape (when rewound) will
stop at the M 0:00:00 position.
Uso
control:_
.... '7_